rake angle
英 [reɪk ˈæŋɡl]
美 [reɪk ˈæŋɡl]
网络 前角; 刀面角; 抠角; 斜角; 倾角
双语例句
- Carbide welded side and face milling cutter helical rake angle
硬质合金焊接式三面刃铣刀（铣刀的）轴向刀面角 - With this model, the geometric parameters for machining the insert pocket of the turning tool with maximum rake angle are obtained while the other requirements of the tool design are satisfied.
采用二维非线性约束优化方法建立可转位车刀刀片槽几何参数优化计算的数学模型，使用该模型可得到满足设计要求并使车刀前角值为最大的车刀刀片槽加工所需的几何参数。 - Profile Design and Accuracy Analysis on Gear Hob of Front Rake Angle
正前角齿轮滚刀的齿形设计和精度分析 - Finite element analysis of grinding chip formation of single abrasive grain with negative rake angle
负前角磨粒磨削过程磨屑形成的有限元仿真分析 - The Principles and Application of Finish Turning Tool with Large Edge Rake Angle To blunt or dull ( the edge of a cutting instrument).
大刃倾角外圆精车刀的工作原理及应用弄钝，弄卷刃（切割工具的刃） - Taper ball-nose end mill; Rake angle; Wheel wear; Simulation;
锥度球头立铣刀；前角；砂轮磨损；仿真； - Higher the rake angle, better is the cutting and less are the cutting forces, increasing the rake angle reduces the metal backup available at the tool rake face.
前角越大，则切削越好且切削力越小，增加前角可以减少刀具前倾面上产生的金属阻塞。 - Influence of Rake Angle of Spherical Milling Cutter on Cutting Capability
球形铣刀前角对切削性能的影响 - The effects of cutting parameters, the tool rake angle, cutting thickness and speed, for bamboo on cutting forces are studied on this paper.
研究了竹材切削不同刀具前角、切削量与切削速度对切削力的影响。 - The slotting tool with isometric profile cylinder hole is designed. The average radius, the rake angle, the relief angle and the space curve of the edge are analyzed and researched.
对插削等距型面孔的插刀进行了设计，对其平均半径、前角、后角、刀刃的空间曲线作了分析和研究。 - In simulation, the influence of rake angle, cutting speed, feed rate, and cutting thickness on cutting force are discussed.
通过切削过程模拟，分别分析了刀具前角、切削速度、进给速度、切削厚度等条件对切削力的影响。 - The effect of the cutting parameters such as cutting velocity, the cutting depth, rake angle on the cutting temperature has been studied.
在单因素条件下，分别改变切削速度、切削厚度和刀具前角，得出了切削速度、切削厚度和刀具前角对切削温度的影响曲线。 - The calculating formulae of the chip-flow angle and the chip-flow rake angle are given.
给出了流屑角和流屑前角的计算公式。 - Edge Shape Error Analysis and Modification Calculation of the Positive rake angle slotting tool
正前角插齿刀刃形误差分析及修正计算 - The paper also discusses the effects of the cutting speed, feed and tool rake angle on the process of chip deformation in turning titanium alloys.
此外，本文还就切削速度、进给量和刀具前角对钛合金车削过程中变形的影响，作了实验分析。 - This paper presents a calculating method for the edge of a new hob with straight groove and zero rake angle. The original section edge of the said hob is on the surface of basic worm.
本文提出了对直槽零前角滚刀，原始截面刃形在基本蜗杆齿面上，其新滚刀刃形的计算方法。 - Both the theoretical analyses and many experiments about the effect of the cutting tool's rake angle on the cutting vibration at different cutting speed during the process of the metal cut have been made.
本文对金属切削中不同切削速度情况下刀具前角对切削振动的影响做了大量的实验，并进行了相应的理论分析。 - The effect of tool rake angle on the geometric shapes of the chip, cutting force and cutting temperature is investigated.
分析了刀具前角对切屑几何形状、切削力和切削温度的影响。 - A finite element model for cutting KDP crystal in ductile mode is established. The effect of rake angle and cutting depth on cutting process of KDP crystal is simulated by the model.
建立了KDP晶体塑性域切削的有限元模型，并用该模型仿真研究了切削参数对KDP晶体表面形成过程的影响。 - With the optimized normal rake angle, machining force and temperature change less, but material removal rate is improved obviously with increasing cutting speed.
通过优化刀具前角，提高切削速度，切削力和切削温度变化较小，但是显著提高了材料去除率。 - The relationship between working rake angle and parameters were studied theoretically.
并从理论上分析了实际切削前角与各参数的关系。 - Influence of Rake Angle of Inclined Edge on Shearing Effect of Die of Inclined Edge
斜刃倾角对斜刃剪切效果的影响 - This paper analyzes the features and the working process of a PDC cutter and defines two working angles of the PDC cutter-back rake angle and side rake angle. The calculation models for the two angles are developed.
分析了PDC钻头切削齿结构特点及工作过程，定义了切削齿的侧倾角和前倾角两个工作角，并建立了这两个角的计算模式。 - Researches on the effect of the cutting speed and rake angle of the machine tool on cutting vibration
切削速度及刀具前角对加工振动影响的探讨 - The results show that the effects on surface roughness are feed speed, depth of cutting, tool rake angle and parts hardness in turn.
结果表明：工件进给速度对表面粗糙度的影响最大，切削深度和刀具前角次之，工件硬度影响最小。 - The influencing orderliness of the cutting depth and the rake angle of the tool on cutting qualities are found and the mathematical models are built.
得出了切削厚度与刀具前角这两个切削参数对切削质量影响的规律，得出二者关系的数学模型。 - The FE model was firstly verified by the comparison of cutting force with the test data. Then the effects of cutting thickness and tool rake angle on serrated chip morphology were analyzed.
首先通过切削力的比较验证了所建模型的可靠性，然后计算分析了切削厚度和刀具前角对锯齿状切屑形态的影响。 - The value of tool wear in ultrasonic vibration cutting of different work-piece has been tested and compared with the experimental results in conventional cutting; Also the influence of tool rake angle and tool nose radius on machined surface roughness in ultrasonic vibration cutting has been researched.
实测了超声波振动切削不同工件材料时的刀具磨损值，并与普通切削试验结果进行了对比；同时研究了超声振动切削时刀具前角和刀尖圆弧半径对切削表面粗糙度的影响。 - Furthermore the effect of rake angle on initiation of cracks is studied as well.
此外还分析了金刚石刀具前角对脆性裂纹产生、扩展的影响。